Stopped using the PC for a week. Came back and an update came out and everything was good. Sometimes theres nothing you can do.
First things first: if people call me they really have a problem and 9 times out of 10 it is not their fault. But, me standing next to the machine while they reproduce the problem “fixes” it about half the time.
Seems like random glitches that only last a minute or two.
I have revived multiple computers and my mom’s windshield wipers with concussive application of a rubber chicken.
That sentence was going rather predictably right up until the last word. Well done.
For several years my pc would only turn on while at a 45degree angle, not on its side and not upright but tilted 45degrees. After it turned on I could put it back and it’d be fine.
Eventually I moved and the pc ended up upside down and shaken, I put it down and a screw fell out of the psu. Problem solved!
D:
Coworker’s story: Trying to fix a prototype in a hotel room at a European trade show. Soldering iron on hand, but it was a 120V iron and glowed white hot when plugged into a 240V outlet.
So they had one person solder and the other person keep unplugging and replugging the iron from the wall at roughly 25%
50%duty cycle.OK, this wins. Far out…
I think this might actually be the dumbest. My fear of electricity is one of the main reasons I focus my tech shenanigans on the software side of things rather than the hardware.
You have to do a lot more work on the software side to release the magic smoke
I have two… these are from the old days of computing :)
One: guy said his monitor was showing wavy lines on the screen (old CRT monitor days). Went to his office, looked at his monitor. Sure enough wavy lines. Looked the top of his monitor. Removed the clock sitting on top of said monitor, no more wavy lines. Don’t put electric clocks on CRT monitors folks.
Two: working in a school system. Just before classes started. Get a call “none of the computers turn on”. Go to the classroom. Check a few machines. Machines “turned on” but didn’t boot the OS. Listen to one of the machines… hmmm, no drive noise. Tap it with the back of a screwdriver. Drive spins up, computer boots. Later found out that it was a semi-known problem with Seagate drives. If they sat to long without use, the heads would get stuck.
When I was a kid I had a tv develop a big rainbow circle in one corner underneath where I set a speaker on top of it. I took it off but the circle didn’t go away. A quick google search later and that’s how I learned what degaussing was.
In my early 20s I had a part-time job as a pizza delivery driver. When there were no deliveries, I would answer phones or take orders at the counter. One day one of the touchscreen monitors at the counter stopped working. It was just black all the time. So we were told not to use it.
A few days later I was on lunch shift and bored, I was trying random things to see if I could fix the monitor. Switched the inputs, switched to a different VGA cable, etc. At one point I discovered the touch panel was still working, I could interact with the OS, even though nothing was displaying. I was pressing around different areas of the screen and I accidentally found that pressing right in the centre of the screen caused the display to re-appear! It would disappear again after a few seconds. Press that spot again, it came back. I was fascinated by this, I showed some coworkers, they didn’t care.
Over the course of the day it was getting harder to make the display re-appear. It gradually needed to be pressed quite forcefully to come back. I started using my knuckles to knock sharply on the spot, and that was working.
When my manager arrived for the night shift, I was excited to show him my discovery. I said “hey man, I kinda fixed this monitor, watch this!” And I enthusiastically knocked hard on the centre of the screen with my first. The LCD lit up and showed the display, but at the same time shattered in a rainbow ring the shape of my fist.
The look on my manager’s face was of awe and horror. I was trying to explain what I had meant to do, but I realised what it must’ve looked like to him. “Hey man, watch me fix this monitor!” Before smashing the screen with a swift punch. It wasn’t possible to explain it a way that didn’t sound crazy.
In the end I convinced him that the monitor was faulty anyway, and we were going to replace it anyway, so my accident breaking it more is not a big deal.
In engineering speak, that’s referred to as “percussive maintenance”.
I had a situation ten or so years ago working on a machine that displayed an error code i didn’t recognize. I looked in the manual, and it had descriptions for error messages like (E1, E2, etc.), but the message was a couple numbers higher than the highest error in the manual (and as a side note, it’s really dumb to program a machine to give an error message without a corresponding key).
I looked through the handwritten old log book for the machine, and found someone referencing the same error code in the early 90’s. The error back then occurred after the machine was moved, but it cleared up after being moved again. We guessed that the issue was a loose connection that got jostled back into place. The machine had just been moved slightly again before our issue, so we assumed it was the same.
We ended up opening the machine, and just poking around until we hit the right wire that reconnected itself and cleared the error message. We wrote that down in the log book as a “digital re-alignment” (digital as in fingers).
Around 2013-2014ish when the fake FBI viruses when commen, I worked at a tech help desk at my university fixing student computers.
We didn’t have a bootable virus scan avaliable but I discovered it you ctrl-alt-deleted you could tell the system to log out, it would close everything and log out.
but if during a split second when the device was turning on before the virus blocked the screen and actions you opened a word doc or something,
then when you logged out it would close everything (including the virus’s window that was blocking the screen) but the word doc and ask if you wanted to save the document first. By hitting cancel it would stop the logout completely and we could run the various virus scans to get rid of it.
This reminds me of way back when i beat a virus with task manager.
This one was showing as a process in task manager. If you killed it, it would just reappear moments later. I even tried finding the folder it was installing on my pc via rightclick on the program in task manager and clicking “open file location” closing the program and deleting its install folder. But it would still come back, installed somewhere else.
After some time messing around, i noticed that another program would show in the task manager, then the virus would appear, and then the other program would close and disappear from the task manager. All within about 1 or 2 seconds
So i killed the task, waited for the other program to appear right click it fast, open file location, and there it was, a different folder with a program that auto runs when the virus is removed to reinstall the virus and close itself to avoid detection.
I deleted that folder and then killed the virus program in the task manager, and it didn’t reappear. I had won!
I seem to recall it was resistent to virus scanners for this reason.
But this was about 20 years ago so i doubt there are viruses that unsophisticated now.
I had something similar. I was looking at my processes one day for some reason, when I noticed CuteFTP. Now, I knew what it was, but I knew for a fact that I hadn’t installed it. Some investigation led to a hidden folder containing some scripts. One of them was for remote control via an IRC channel. So I hopped in the channel and had a chat with the user who was set to admin the bot on my computer.
Edit: Formatting.
Yeah around the same time as those fbi ones there were ones like that but they generated new ones with randomized names trying to hide. I think
Fucking baller status. There were a couple of fixes, not as complex as yours of course, that I figured out during the wild west of internet and virus infection. Can’t remember any of it in detail, but yeah, shit was it’s own kind of puzzle and was awesome to find a fix like this.
Friend’s desktop was so fried from Kazaa and Limewire, that he couldn’t even open a Windows explorer window. Ended up opening Notepad and copying all of his files to a thumbdrive using the file open dialog box before reformatting.
Didn’t notepad file dialogue also use explorer?
IIRC, yes but it’s called differently. I’ve used that technique to work around nannyware a time or two.
This is good to know; does it still work? I’m assuming with the anecdote involving KaZaA and LimeWire we’re talking Windows 2000, ME, or XP.
This kind of hacky dumb workaround is exactly what I wanted to read when I posted this thread, haha. It’s kind of genius but also I’m horrified to imagine how things got to that point.
Ran a hairdryer all night, propped against my Mac laptop keyboard after a friend knocked over a full pint of beer onto it.
The next morning the whole bathroom reeked of stale beer, the power bill was astronomical, and the left quarter of the keyboard never worked again.
Took it in for repairs and was grateful AppleCare swapped it out without a peep. This was a while back, before the embedded moisture strips that void the warranty.
I’m a web applications developer…. So a lot. But here’s the king of dumb shit fixes I’ve done. Back in the days of VGA a few friends and I met up with some other dudes for a counter strike LAN party. Everyone’s hauling their towers in and if you were lucky, your heavy as fuck 17” CRT. So I set up and my monitor won’t work. Has power, no signal. Switch from the gpu vga port to the integrated one and it works. Switch back to gpu and it works as long as I hold it in a weird position. So it’s all fine, just the connection is wearing out. For some reason I figure a little moisture will help so I lick the vga plug, reattach it and it totally solved the problem.
So yeah, I licked a gpu into working again.
Kinky
I once had to tell a colleague that her breasts were pressing the space bar when she put an invoice in her processed tray. I don’t know about dumb but it was embarrassing.
Had a coworker who kept complaining anytime she’d open any dialog boxes they immediately closed. Turns out she had a binder sitting on the edge of her keyboard right on the escape key.
How did she take it?
She was also quite embarrassed. As a fix, we moved her keyboard a few inches.
I stabbed a router with a knife twice and it worked. It knew I wasn’t fucking around now.
We’ve tried talking, we’ve tried percussive maintenance, now it’s time to take things up a notch and let these silly little machines know who’s boss.
Easy.
When I was 13, we had an Apple IIc. My mother used to take the cable that connected the computer and the monitor to work with her so I’d focus on homework rather than playing Ultima IV.
But it was a monochrome signal. I straightened out a metal coat hanger and plugged it in… it worked just fine if you didn’t bump it.
Damn, either you were a really smart 13 year old, or you must have been super desperate and then amazed that that actually worked.
Looking back, I have zero ideas on where I came up with the idea or why I even tried it!
Needed to get a server back online when it’s CPU cooler had failed
Found some random cooler for a totally different CPU, smeared thermal paste on it and zip-tied the cooler to the mobo and case as best I could.
That thing ran like a champ for almost 6 months till I got around to replacing it
